R
To use the unit’s answering machine rather
than the voice mail service provided by
your service provider/telephone company,
please contact your service provider/
telephone company to have it removed or
deactivated permanently or temporarily.
Alternatively you can leave this service
connected and change the
“
Ring count
”
to a shorter duration on your unit so your
unit’s answering machine can pick up the
call prior to the voice mail provided by your
service provider/telephone company.
For Telecom Call Minder or
TelstraClear Message Mailbox
service subscribers (for New Zealand)
To receive Call Minder or Message Mailbox
messages and use the unit’s answering
system properly, please note the following:
R
“Call Minder” and “Message Mailbox” are
services provided by your service provider/
telephone company (page 62). You will
need to first subscribe or activate this
service through your service provider/
telephone company.
Contact your service provider/telephone
company on how to operate this service
and how you will be notified that you have
messages. To use this service you will be
required to leave your answering machine
off on your unit (page 55). This will allow
the service to receive any messages.
R
To use the unit’s answering machine rather
than the service provided by your service
provider/telephone company, please
contact your service provider/telephone
company to have it removed or deactivated
permanently or temporarily. Alternatively
you can leave this service connected and
change the
“
Ring count
”
to a shorter
duration on your unit so your unit’s
answering machine can pick up the call
prior to the service provided by your service
provider/telephone company.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is
“
3 min
”
.
Handset
1
M
MENU
N#305
2
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
Selecting “
Greeting only
”
You can select
“
Greeting only
”
which sets
the unit to announce a greeting message to
callers but not record messages.
Select
“
Greeting only
”
in step 2 on
“Caller’s recording time”, page 61.
Note:
R
When you select
“
Greeting only
”
:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 56).
61
Answering System for Landline
TG787xAZ(en)_0204_ver012.pdf 61
2013/02/04 13:15:58
