Panasonic KX-TG7841BX Operating Instructions Manual Download Page 64 | Manualshive

Page: 64 / 68

background image

Using Bluetooth devices

Problem

Cause/solution

I cannot copy phonebook
entries from a cellular phone.

R

Confirm that the cellular phone supports Bluetooth
wireless technology.

R

Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.

R

If the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.

R

Someone is using a cellular line or headset. Try again
later.

R

Turn the cellular phone off, then turn it on and try again.

R

If an entry is already stored in the unit’s shared
phonebook, the entry cannot be copied even by selecting
another group.

I cannot have a conversation
using the headset.

R

Your Bluetooth headset is not paired. Pair it (page 46).

R

Turn your headset off, then turn it on and try again.

Noise is heard during a call on
the headset.

R

A Bluetooth headset can communicate with the base unit
within a range of approximately 10 m. The connection
may be subject to interference from obstructions such as
walls or electronic devices. Move closer to the base unit.

I cannot connect my headset to
the base unit.

R

Confirm that your headset is turned on.

R

If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the
headset from your cellular phone, then perform the
connecting procedure from the base unit.

R

If someone is using a cellular line, you cannot connect the
headset. There can be only one active Bluetooth
connection at a time.

R

The headset has not been paired to the base unit. Pair
the headset (page 46).

Some headset enhanced
features are not available.

R

The base unit does not support enhanced features such
as Last number redial or Call reject.

An error tone is heard when I
try to program the Bluetooth
feature.

R

The Bluetooth feature cannot be accessed immediately
after connecting the AC adaptor to the base unit. Wait a
few seconds and try again.

R

The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting.
Wait a few seconds and try again.

64

Useful Information

TG7841BX_UE(en)_0528_ver011.pdf 64

2013/05/28 18:56:50

«
...
62
63
64
65
66
...
»

Summary of Contents for KX-TG7841BX





































































Reviews:

No comments

Related manuals for KX-TG7841BX

Brand: Dakota Alert Pages: 2

Brand: Daisy Pages: 16

Brand: DAINCUBE Pages: 38

Brand: PABX Pages: 27

Brand: Sylvania Pages: 2

Brand: ESI Pages: 114

Brand: Topcom Pages: 28

Brand: MOBICEL Pages: 69

DCX750 - DCX 750 Cordless Extension Handset

Brand: Uniden Pages: 20

Brand: Serene Pages: 30

Brand: Yada Pages: 14

Brand: ALcom Pages: 14

Brand: Trident Voice Pages: 2

Brand: Hitachi Koki Pages: 52

Brand: Craftsman Pages: 18

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands