Panasonic KX-TG7341NZ, Operating Instructions Manual

Page: 13 / 52

Preparation
13
Battery charge
Place the handset on the base unit or
charger for about 7 hours before
initial use.
L
While charging, “
Charging
” is
displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged,
“
Charge
Completed
” displays. The charge
indicator stays lit even after the
batteries are fully charged.
Note:
L
It is normal for the handset to feel
warm during charging.
L
If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L
Clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Panasonic Ni-MH battery
performance (supplied batteries)
Note:
L
It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L
Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L
Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L
The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
Battery icon Battery level
1
High
2
Medium
3
Low
L
When flashing:
Needs charging.
Operation Operating
time
In continuous use 17 hours max.
Not in use
(standby) 150 hours
max.
TG7341NZ(e).book Page 13 Wednesday, September 3, 2008 11:37 AM