– 6 –
Frequently asked questions
Question
Cause & solution
Battery charge
How do I charge the battery?
L
Make sure that the battery is properly installed in
the handset and the cover is closed. Place the
handset on the base unit or charger. When
charging,
“
Charging
”
is displayed.
L
It takes about 7 hours to charge the empty battery.
When the batteries are fully charged,
“
Charge
Completed
”
is displayed.
Can I leave the handset on
the base unit or charger after
battery is fully charged or
each call is finished?
L
You can place the handset on the base unit or
charger anytime. Battery is not overcharged and
there is no damage to the battery. By placing the
handset on the base unit or charger, it is always
fully charged.
What should I do when the
operating time seems to be
shorter even after I fully
charged the batteries?
L
Clean the battery ends (
S
,
T
) and the charge
contacts with a dry cloth, and charge again.
Where can I buy new
battery?
L
Battery can be purchased through your local
retailer.
Range/Distance (No link to base)
What is the range/distance of
my cordless phone? (Why
am I getting short or poor
range/distance on my
cordless phone?)
Why is
w
flashing?
L
Range/distance is related to technology and
enviromental factors. Therefore we cannot
provide a given range or distance.
L
Make sure that the AC adaptor is properly
connected to wall socket and to the base unit and
make sure that beep tones on the handset sound
when you press
{x}
on the base unit.
L
Move closer to the base unit (Allow up to
90 seconds for the handset to reassign to the
base unit.).
L
If you try manual registration process, allow up to
90 seconds for the handset to reassign to the
base unit.
L
If the above remedies do not solve the problem,
refer to the troubleshooting section in your
Operating Instructions for more information.
TG7301_7321AL(e)_QG.fm Page 6 Monday, May 26, 2008 11:09 AM