Panasonic KX-TG7120FXS Service Manual Download Page 16

Page: 16 / 90

KX-TG7120BXS/KX-TG7120BXT/KX-TGA711CXS/KX-TGA711CXT

5 Location of Controls and

Components

5.1.

Controls

5.1.1.

Base Unit

5.1.2.

Handset

6 Installation Instructions

6.1.

Connections

Base unit

When connecting the AC adaptor to the base unit, a short
beep will be heard. If it is not heard, check the connections.

Charger

Connect the AC adaptor to the charger and route the cable
as shown. The charger can be mounted on the wall, if
required.

Note:

• Never install telephone wiring during a lightning storm.
• The AC adaptor must remain connected at all times. (It is

normal for the adaptor to feel warm during use.)

• The AC adaptor should be connected to a vertically oriented

or floor-mounted AC outlet. Do not connect the AC adaptor
to a ceiling-mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.

Location

• For maximum distance and noise-free operation, place your

base unit:

- away from electrical appliances such as TVs, radios,

personal computers or other phones.

- in a convenient, high and central location.

Summary of Contents for KX-TG7120FXS



























































































Search results

Summary of Contents for KX-TG7120FXS

Reviews:

Brands by name

Popular brands

Panasonic KX-TG7120FXS, Service Manual

Search results

Summary of Contents for KX-TG7120FXS

Reviews:

Brands by name

Popular brands