Panasonic KX-TG7100ES, Service Manual

Page: 15 / 83

15
KX-TG7100ES/KX-TG7102ES/KX-TG7103ES/KX-TGA710ES
5 Location of Controls and
Components
5.1. Controls
5.1.1. Base Unit
5.1.2. Handset
6 Installation Instructions
6.1. Connections
Base unit
When connecting the AC adaptor to the base unit, a short
beep will be heard. If it is not heard, check the connections.
Charger
Connect the AC adaptor to the charger and route the cable
as shown. The charger can be mounted on the wall, if
required.
Note:
• Never install telephone wiring during a lightning storm.
• The AC adaptor must remain connected at all times. (It is
normal for the adaptor to feel warm during use.)
• The AC adaptor should be connected to a vertically oriented
or floor-mounted AC outlet. Do not connect the AC adaptor
to a ceiling-mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
• The unit will not work during a power failure. We
therefore recommend you also connect a corded-type
telephone (without AC adaptor) to the same telephone line
using a T-adaptor. Your Panasonic sales shop can offer you
more information about connection possibilities.
Location
• For maximum distance and noise-free operation, place your
base unit:
- away from electrical appliances such as TVs, radios,
personal computers or other phones.
- in a convenient, high and central location.