manualshive.com logo in svg

Panasonic KX-TG6511TRB, Service Manual

Share
Download
Panasonic KX-TG6511TRB Service Manual Download Page 22

22

KX-TG6511TRB/KX-TG6511TRM/KX-TGA650EXB/KX-TGA650EXM/KX-TGA651EXB/KX-TGA651EXM

8.3.

How to Clear User Setting

Units are reset to the Factory settings by this operation (Erase recorded Voice messages*, stored Phone numbers, Caller list
and etc.)

Note:

• Some menus are not reset. Refer to 

Operating Instructions

 (P.15).

• The reset menus differ depending on the following operations.
•

This operation should not be performed for a usual repair.

* KX-TG6521/KX-TG6522/KX-TG6523/KX-TG6524 only

8.3.1.

Resetting both base unit and handset

Both the base unit and the registered handset which you did the following steps 

 to 

 are reset. Other registered handsets

will not be reset.

Note:

(*1) Refer to 

Registering a Handset to a Base Unit

 in the Operating Instructions.

8.3.2.

Resetting only handset

The only handset is reset by doing the following steps 

 to 

.

Note: 

(*2)

• The handset registration to the base unit is cancelled.
• If the handset needs to be registered to the base unit, refer to 

Registering a Handset to a Base Unit

 in the Operating

Instructions.

• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.

Summary of Contents for KX-TG6511TRB



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands