Multi-unit Operation
56
Auto intercom/Room monitor
This feature allows you to:
– answer an intercom call without pressing
any buttons on the handset.
– listen to the sound in a room where the
handset is located.
Turning auto intercom on/off
“
Off
” (Default): Turns this feature off.
“
On(Ringer On)
”: When an intercom call
is received, the handset rings 2 times then
the speakerphone is automatically turned
on.
“
On(Ringer Off)
”: When an intercom
call is received, the handset does not ring
and the speakerphone is automatically
turned on. This allows you to easily
monitor a baby’s room, for example, from
different areas of the house.
1
{
MENU
}
(middle soft key)
i
{#}{
2
}{
7
}{
3
}
2
Select the desired setting.
3
{
SAVE
}
i
{
OFF
}
Note:
L
This feature cannot be used when the
base unit is paging all handsets, or when
receiving a transferred call.
Answering an intercom call using auto
intercom
1
When you are paged by the base unit or
another handset, speak into the
microphone.
L
To switch to the receiver, press
{C}
.
2
To end the intercom, press
{
OFF
}
.
Note:
L
Auto intercom cannot be used when:
– all handsets are being paged by the
base unit.
– your handset is receiving a transferred
outside call.
Monitoring audio in a room
With a handset or the base unit, you can
listen to the sound in a room where
another handset is located.
Important:
L
Before using this feature, set auto
intercom of the destination handset to
“
On(Ringer Off)
” to allow access by
other handsets.
1
Call the destination handset (page 55).
L
You can listen to the audio.
2
To mute your sound output, press
{
MUTE
}
if necessary.
3
Press
{
OFF
}
to stop monitoring.
1
Call the destination handset (page 55).
L
You can listen to the audio.
2
To mute your sound output, press
{
MUTE
}
if necessary.
3
Press
{
INTERCOM
}
to stop monitoring.
Handset
Handset
Handset
Base unit
TG5762C_5766C(e).book Page 56 Monday, April 17, 2006 11:48 AM
