13.7.4. TEST RANGE Check
Circuit block which range is defective can be found by the following check.
Item
BU (Base Unit) Check
HS (HandSet) Check
Range Confirmation TX
TEST
(TX Power check)
HS, BU Mode:
[Test Link Mode] (*1)
1. Register Regular HS to BU (to be checked).
2. Set BU to “Test Link mode”.
3. Set Regular HS to “Test Link mode”.
*Set TX Power and RX Sensitivity ofthe BU and the
Regular HS by CHART1.
* At distance ofabout 20m between HS and BU,
Link OK = TX Power ofthe BU is OK.
No Link = TX Power ofthe BU is NG.
1. Register HS (to be checked) to Regular BU.
2. Set Regular BU to “Test Link mode”.
3. Set HS to “Test Link mode”.
*Set TX Power and RX Sensitivity ofthe HS and the
Regular BU by CHART1.
* At distance ofabout 20m between HS and BU,
Link OK = TX Power ofthe HS is OK.
No Link = TX Power ofthe HS is NG.
Range Confirmation RX
TEST
(RX sensitivity check)
HS, BU Mode:
[Test Link Mode] (*1)
1. Register Regular HS to BU (to be checked).
2. Set BU to “Test Link mode”.
3. Set Regular HS to “Test Link mode”.
*Set TX Power and RX Sensitivity ofthe BU and
Regular HS by CHART1.
* At distance ofabout 20m between HS and BU,
Link OK= RX Sensitivity ofthe BU is OK.
No Link = RX Sensitivity ofthe BU is NG.
1. Register HS (to be checked) to Regular BU.
2. Set Regular BU to “Test Link mode”.
3. Set HS to “Test Link mode”.
* Set TX Power and RX Sensitivity ofChecking_HS
and Regular_BU by CHART1.
* At distance ofabout 20m between HS and BU,
Link OK= RX Sensitivity ofthe HS is OK.
No Link = RX Sensitivity ofthe HS is NG
CHART1: Setting of TX Power and RX Sensitivity in Range Confirmation TX TEST, RX TEST
BU (to be checked)
Regular_HS
TX Power
RX Sens.
TX Power
RX Sens.
BU (Base Unit) TX Power Check
High
High
High
Low
BU (Base Unit) RX Sensitivity Check
High
High
Low
High
HS (to be checked)
Regular_BU
TX Power
RX Sens.
TX Power
RX Sens.
HS (Handset) TX Power Check
High
High
High
Low
HS (Handset) RX Sensitivity Check
High
High
Low
High
Note:
(*1)
ADJUSTMENT AND TEST MODE
(P.51)
47
KX-TG5431BXS / KX-TGA542BXS
Summary of Contents for KX-TG5431BXS
