4. The time has been changed incorrectly without me knowing it. What happened?
After the system time is set, the time in Caller ID information will automatically adjust the
system time by default. Incorrect time display may be caused by the time information in
Caller ID data when the call initiates from a different time zone. To have the correct time
display, set the time again then select Time adjustment to Manual on the base unit.
5. How do I use the speed dial? How do I save speed dial #s?
Speed dial allows you to store up to ten phone numbers for quick dialing.
To save speed dial #'s using the handset, press the joystick and scroll down to Speed
Dial # and push the SELECT soft key once. Select the speed dial memory position (0-9)
you want and enter the phone number and then hit the save key. On the base unit, press
MENU, scroll down to Speed dial # and press ENTER. Scroll down to the speed dial
memory position (0-9) you want then press ENTER. Enter the phone number and hit the
SAVE key.
To dial using the speed dial feature, simply press the keypad button (0-9), where the
speed dial number is saved. Wait until the phone number is displayed, and then press the
TALK button, Sp-phone button or lift base corded Handset to complete the speed dial.
6. I have an additional telephone connected to Line 1 in parallel with KX-TG4500B, when
this phone is picked up, how can I join in the conversation with the Base Unit or a
Handset?
When the external parallel phone is picked up on a line, the line status icon/indicator will
be displayed on the Base unit (Line LED) or on the Handset display. To access the line
and join in the conversation, press and hold the line button for 3 seconds. (If just press
the line button, Busy will be displayed on the screen, this is normal).
7. After I insert the battery into the handset, the Handset screen is blank. What should I
do?
This is normal. Try pressing the OFF key on the Handset or place the Handset on the
handset charger and the LCD will start to display information such as Handset number,
etc.
8. How do I place a two-line conference call on Hold and how do I release it from Hold?
On the Handset: press the HOLD button. To release it from Hold, press one of the line
buttons (e.g. L1, L2), then press the Conf soft key.
On the Base Unit: press the HOLD button. To release it from Hold, press one of the line
button (e.g. L1, L2), then press the CONF button.
9. During a conference call with two external parties, how do I mute the conference call?
During the conference call, press the Mute button either on the Base or Handset. Your
voice is muted and the two external parties will not hear your voice. To release the Mute,
simply press the Mute button again either on the Base or Handset.
10. How do I erase the customized Handset name and return to the default name of
Handset 1, Handset 2, etc.?
On the Handset, press MENU, scroll to Initial setting, then select Change HS name, then
enter custom name and press SAVE. To return to the default names, at the Change HS
name prompt press Enter, then press [CLEAR] and Save. Default name (Handset 1, or
Handset 2, etc.) will then be displayed on Handset screen.
