Panasonic KX-TG403SK Operating Instructions Manual Download Page 4

Page: 4 / 52

*2 By installing this unit, you can extend the range of your phone system to include areas

where reception was previously not available. This product can be purchased online. Please
visit our Web site: http://www.panasonic.com/RangeExtender

Other information

Design and specifications are subject to change without notice.

The illustrations in these instructions may vary slightly from the actual product.

Expanding your phone system

Handset (optional): KX-TGDA20

You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.

Optional handset is a different design from
that of the supplied handsets.

You cannot purchase the supplied handset
(KX-TGCA21) separately.

For assistance, please visit http://www.panasonic.com/help

Introduction

TG403_433SK_OI_(en-en)_1211_ver.020.pdf 4

2013/12/10 20:01:04

Summary of Contents for KX-TG403SK





















































Search results

Summary of Contents for KX-TG403SK

Reviews:

Related manuals for KX-TG403SK

Brands by name

Popular brands

Panasonic KX-TG403SK, Operating Instructions Manual

Search results

Summary of Contents for KX-TG403SK

Reviews:

Related manuals for KX-TG403SK

Brands by name

Popular brands