Panasonic KX-TG3752 Page 52 Operating Instructions Manual Download

Page: 52 / 72

Error messages

Display message

Cause/solution

Ask phone
company for
VM access #

You have not stored the voicemail access number. Store the
number (page 49).

Base no power

No link. Re-
connect base
AC adaptor.

Confirm the base unit’s AC adaptor is connected to the unit
and the power outlet correctly.

The handset has lost communication with the base unit. Move
closer to the base unit and try again.

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

The handset’s registration may have been canceled.
Re-register the handset (page 38).

Busy

The called unit is in use.

Other units are in use and the system is busy. Try again later.

The handset you are using is too far from the base unit. Move
closer and try again.

Check tel line

The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 10).

Error!!

Recording was too short. Try again.

Invalid

There is no handset registered to the base unit matching the
handset number you entered.

The handset is not registered to the base unit. Register the
handset (page 38).

Requires
subscription
to Caller ID.

You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.

Use
rechargeable
battery.

A wrong type of battery such as alkaline or manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 4, 7.

For assistance, please visit http://shop.panasonic.com/support

Useful Information

TGF242_TG3752USA(en)_1107_ver021.pdf 52

2016/11/07 11:49:50

Summary of Contents for KX-TG3752









































































Search results

Summary of Contents for KX-TG3752

Reviews:

Related manuals for KX-TG3752

Brands by name

Popular brands

Panasonic KX-TG3752, Operating Instructions Manual

Search results

Summary of Contents for KX-TG3752

Reviews:

Related manuals for KX-TG3752

Brands by name

Popular brands