Intercom/Locator
29
3
Proceed with the desired operation.
■
To complete the transfer:
Press
{
SP-PHONE
}
or place the corded
handset on the cradle.
L
The outside call is being routed to the
handset.
■
To establish a conference call:
Press
{
HOLD
}
.
L
To leave the conference, place the corded
handset on the cradle. The other parties
can continue the conversation.
L
To put the outside call on hold, press
{
HOLD
}
. To resume the conference,
press
{
HOLD
}
again.
L
You can cancel the conference call by
pressing
{
INTERCOM
}
to continue the
outside call.
Note:
L
While you use the speakerphone, you cannot
make a conference call.
1
During an outside call, press
{
INTERCOM
}
to
put the call on hold.
L
If voice paging is turned on (page 28), speak
into the microphone after the 2 rings.
2
Wait for the paged party to answer.
L
If the paged party does not answer, press
{C}
to return to the outside call.
3
Proceed with the desired operation.
■
To complete the transfer:
Press
{i}
.
L
The outside call is being routed to the
destination unit.
■
To establish a conference call:
Press
{
INTERCOM
}
.
L
To leave the conference, press
{i}
. The
other parties can continue the
conversation.
L
To put the outside call on hold, press
{
HOLD
}
. To resume the conference,
press
{
HOLD
}
again.
L
You can cancel the conference call by
pressing
{C}
to continue the outside
call.
Answering a transferred call
Lift the corded handset or press
{
INTERCOM
}
to
answer the page.
Press
{C}
to answer the page.
Note for handset and base unit:
L
After the paging party disconnects, you can talk
to the outside caller.
Handset locator
You can locate a misplaced handset by paging it.
1
Base unit:
Press
{
LOCATOR
}
.
2
To stop paging:
Base unit:
Press
{
LOCATOR
}
.
Handset:
Press
{C}
, then press
{i}
.
Note:
L
When the ringer volume for outside calls is set to
off (page 15), the handset rings at a low level for
paging.
Y
Handset
=
Base unit
Y
Handset
TG3651BX(e).book Page 29 Monday, May 31, 2010 8:51 AM
