manualshive.com logo in svg

Panasonic KX-TG3611BX, User Manual

Share
Download
Panasonic KX-TG3611BX User Manual Download Page 25

Useful Information

25

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

*1 KX-TG3612

Display message

Cause/solution

Busy

or

System is busy. 
Please try again 
later.

L

The called handset is in use.

*1

L

Another handset is in use and the system is busy. 
Try again later.

*1

L

The handset you are using is too far from the base 
unit. Move closer and try again.

L

The handset’s registration may have been 
canceled. Re-register the handset (page 29).

Check tel line

L

The supplied telephone line cord has not been 
connected yet or not connected properly. Check 
the connections (page 7).

Dial locked

L

Dial lock is turned on. To turn it off, see page 13.

Don’t use this 
battery.

L

A wrong type of battery such as Alkaline or 
Manganese was inserted. Use only the 
rechargeable Ni-MH batteries noted on page 3, 5.

Error!!

L

The handset’s registration has failed. Move the 
handset and base unit away from all electrical 
appliances and try again.

L

The entered password was wrong in programming 
dial lock. Enter the correct password.

Invalid

L

There is no handset registered to the base unit 
matching the handset number you entered.

*1

L

The handset’s registration may have been 
canceled. Re-register the handset (page 29).

No link to base. 
Reconnect AC 
adaptor.

L

The handset has lost communication with the 
base unit. Move closer to the base unit and try 
again.

L

Unplug the base unit’s AC adaptor to reset the 
unit. Reconnect the adaptor and try again.

L

The handset’s registration may have been 
canceled. Re-register the handset (page 29).

TG361xBX(e).book  Page 25  Friday, February 6, 2009  11:40 PM

Summary of Contents for KX-TG3611BX

































Reviews:

No comments

Brands by name

Popular brands

Load more brands