Copying phonebook from a
cellular phone (phonebook
transfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit’s phonebook. A cellular
phone must be compatible with Bluetooth
wireless technology.
Important:
R
Your cellular phone must support Phone
Book Access Profile (PBAP) or Object
Push Profile (OPP) specification.
R
If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
R
If a phonebook entry includes additional
data such as a picture, that entry may fail to
copy to the base unit.
R
If your cellular phone includes international
call entries, set the conversion codes
before copying (page 45).
1
Handset:
M
MENU
N#618
2
Handset:
To copy from paired cellular phones:
MbN
: Select the desired cellular phone.
a
M
SELECT
N
R
Copied items are stored to the group
(
“
Cell 1
”
or
“
Cell 2
”
) which the
cellular phone is paired to.
To copy from other cellular phones
(not paired):
MbN
:
“
Other cell
”
a
M
SELECT
N
a
MbN
: Select the group you want to copy to.
a
M
SELECT
N
3
Handset:
When “
Use the cell to
transfer phone book
” is displayed:
Go to step 4.
When “
Select mode
” menu is
displayed:
MbN
: Select
“
Auto
”
or
“
Manual
”
.
a
M
SELECT
N
“
Auto
”
: Download all entries from the
cellular phone automatically. Go to step 5.
“
Manual
”
: Copy entries you selected.
R
“
Select mode
”
menu is displayed
only when the cellular phone supports
Phone Book Access Profile (PBAP) for
Bluetooth connection.
R
Some cellular phones may require you
to perform an operation on the cellular
phone even if you select
“
Auto
”
.
4
Cellular phone:
Follow the instructions of your cellular
phone to copy phonebook entries.
R
For other cellular phones (not paired),
you need to search for and select the
base unit. The Bluetooth PIN (default:
“
0000
”
) may be required.
R
If your cellular phone prompts you to
confirm the passkey, tap
M
OK
N
or
otherwise to accept the pairing request.
R
The entries being copied are displayed
on the handset.
5
Handset:
Wait until
“
Completed
”
is displayed.
R
You can continue copying other entries
if necessary.
6
Handset:
M
OFF
N
Note:
R
Some copied entries may have characters
which are not available. These characters
can be displayed but cannot be entered
when editing an entry.
R
The unit does not support some characters.
If a copied entry includes those characters,
they are replaced with other available
characters or “
H
”.
R
If you receive a call while copying
phonebook entries, the copying procedure
stops. Try again after finishing the call.
Setting conversion codes
You must first set the following 3 dialing codes
before transferring the phonebook from your
cellular phone (4 digits max. each).
–
“
International code
”
: An international
prefix used when you make an international
call.
–
“
Country code
”
: Your country code for
international calls.
For assistance, visit www.panasonic.ca/english/support
45
Using Bluetooth® Devices
KX-TG273CSK̲(en-en)̲0525̲ver110.pdf 45
2018/06/02 10:39:10
