manualshive.com logo in svg

Panasonic KX-TG2581ALS, KX-TG2581NZS, Operating Instructions Manual, Page: 38 / 80

Share
Download
Panasonic KX-TG2581ALS, KX-TG2581NZS Operating Instructions Manual Download Page 38

Erasing Caller List Information

After checking the Caller List, you can erase some or all of the entries.
Make sure the unit is in the standby mode initially. 

To erase a specific caller from the Caller List

1

Lift the handset off the base unit and press

Ö

or 

Ñ

to enter the Caller List.

2

Press 

Ö

or 

Ñ

repeatedly to find the caller

you want to erase from the Caller List.

3

Press 

(INTERCOM/CLEAR)

.

•

A beep sounds and the information is erased.

•

To erase other items, repeat from step 2.

•

To return to the standby mode, press 

(FUNCTION/EXIT/CH)

. 

38

Using the Caller List

0246813579
12:20A JAN12 

√

Clear

10 new calls

GF

H

=Directory

•

You cannot store caller information in the directory if a phone number is not
displayed.

•

If 3 beeps sound and the display shows “

Save error

” in step 5, move closer to

the base unit and start again from step 2.

For New Zealand Users:
Your telephone company may charge you for a local call if the number
dialled has the area code prefix included. If the charge for local call is
unacceptable, only the 7-digits of the local number should be dialled
from your telephone. Do not dial the “0” prefix or the area code digit.

Summary of Contents for KX-TG2581ALS, KX-TG2581NZS

















































































Reviews:

No comments