Panasonic KX-TG2559LBS, Service Manual

Page: 53 / 90

9.4. Signal Flowchart in the Whole System
Reception
CN101 of the base unit is connected to the TEL line, and the signal is input through the bridge diode D101. While talking the
relay (Q121) is turned ON and amplified at the amplifiers Q461, then led to DSP (IC501). DSP generates ADPCM signal. The
ADPCM signal is input to RFIC (IC101) of RF UNIT, and is mixed with pseudo random noise code (PN code) to spread the
spectrum. RFIC outputs FSK modulated RF signal. The RF signal is passed through the balun (T101) and filter (L107) to the
T/R switch (IC109). And the RF signal amplifies by the power amplifier (IC105) and fed into T/R switch (IC110) and passes
through filter (L106) to Diversity ANTENNA. As for the handset, RF signal from the antenna passes through filter (L106) and
switch by T/R switch (IC110) to LNA (IC106). The RF signal is amplified by LNA (IC106) and switched by T/R switch (IC109)
and input to RFIC passing through filter (L107) and the balun (T101) to perform the de-spread, then input to DSP (IC201). DSP
performs ADPCM decoding to convert the signal into the voice signal, then it is output to the speaker.
Transmission
The voice signal input from the microphone is led to DSP (IC201). The DSP generates ADPCM signal. As well as the reception,
it is converted into the RF signal by RFIC (IC101). Passing through the balun (T101) and filter (L107), to the T/R switch (IC109).
And the RF signal amplifies by the power amplifier (IC105) and fed into T/R switch (IC110) and passes through filter (L106) to
ANTENNA. As for the base unit, RF signal from the Diversity antenna passes through filter (L106) and switch by T/R switch
(IC110) to LNA (IC106). The RF signal is amplified by LNA (IC106) and switched by T/R switch (IC109) and is input to RFIC
(IC101) passing through filter (L107) and the balum (T101) to perform the de-spread, then input to DSP (IC201). DSP performs
ADPCM decoding to convert the signal into the voice signal. The voice signal is amplified at the TX amplifier (Q131), then output
to the TEL line (CN101) through the relay (Q121) and bridge (D101).
53
KX-TG2559LBS