Useful Information
35
Caller ID
Answering system (KX-TG2521)
Problem
Cause/solution
Caller information is not displayed.
L
You must subscribe to a Caller ID service. Contact
your service provider/telephone company for
details.
L
If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into
the wall jack.
L
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L
Other telephone equipment may be interfering with
this unit. Disconnect the other equipment and try
again.
Caller information is slow to
display.
L
Depending on your service provider/telephone
company, the unit may display the caller’s
information at the 2nd ring or later.
L
Move closer to the base unit.
The name stored in the phonebook
is not fully displayed while an
outside call is being received.
L
Edit the phonebook entry name to fit in 1 line of text
(15. oldal).
Problem
Cause/solution
The unit does not
record new messages.
L
The answering system is turned off. Turn it on (23. oldal).
L
The message memory is full. Erase unnecessary messages
(25. oldal).
L
The recording time is set to
“
Csak üdvözlés
”
. Change the
setting (27. oldal).
L
If your own greeting message is not recorded properly, callers
are unable to leave a message. Record your own greeting
message again (23. oldal).
L
If you subscribe to a voice mail service, messages are recorded
by your service provider/telephone company, not your
telephone. Change the unit’s number of rings setting or contact
your service provider/telephone company (26. oldal).
My own greeting
message cannot be
properly heard.
L
Record your own greeting message again (23. oldal).
I cannot operate the
answering system.
L
A caller is leaving a message. Wait for the caller to finish.
L
The handset is too far from the base unit. Move closer.
TG2511_2521HG(e-hg).book Page 35 Thursday, January 21, 2010 3:16 PM
