Speed Dialer
Section 3
3
3-A Storing Phone Numbers in Memory
Special Features
5
1
Press
PROGRAM
á
.
•
The TALK indicator flashes.
2
Enter a phone number up to 22 digits.
3
Press
AUTO
Ü
.
4
Press a memory station number (
(0)
to
(9)
).
•
A beep sounds.
•
To store other numbers, repeat steps 1 through 4.
3-B Dialing a Stored Number
Press
(TALK)
\
AUTO
Ü
\
the memory station number (
(0)
to
(9)
).
•
If your line has rotary or pulse service, any access numbers stored after pressing
(TONE)
will not be dialed.
If you misdial
Press
PROGRAM
á
to end storing.
\
\
Start again from step 1.
To erase a stored number
Press
PROGRAM
á
\
AUTO
Ü
\
\
the memory station number (
(0)
to
(9)
)
for the phone number to be erased.
•
A beep sounds.
•
If a pause is required for dialing, press
(PAUSE)
where needed. Pressing
(PAUSE)
counts as one digit (5-D).
You can store up to 10 phone numbers in the handset. The dialing buttons (
(0)
to
(9)
) function as memory stations.
The TALK indicator light must be off before programming.
5-D How to use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press
(PAUSE)
if a pause is required for dialing with
a PBX or to access a long distance service.
Ex: Line access number
(9)
(PBX)
(9)
\
(PAUSE)
\
•
Pressing
(PAUSE)
once creates a 3.5 second pause. This prevents
misdialing when you redial or dial a stored number.
•
Pressing
(PAUSE)
more than once increases the length of the pause
between numbers.
5-E Handset Locator
You can locate the handset or page the handset user with beep tones.
1
Press
(HANDSETÒLOCATOR)
on the base unit.
•
The IN USE/CHARGE indicator flashes and the handset beeps for 1
minute.
2
To stop paging, press
(HANDSETÒLOCATOR)
again or press
(TALK)
twice on the handset.
Phone number
5-A For Call Waiting Service Users
Press
(FLASH)
if you hear a call-waiting tone while talking.
•
The first call is put on hold and you can answer the second call.
•
To return to the first caller, press
(FLASH)
again.
•
If this function does not operate properly, consult your telephone company
for details.
5-B Automatic Security Code Setting
Whenever you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
5-C Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press
(TONE)
before entering access numbers which require tone dialing.
•
The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the
mode will return to pulse.
•
Access numbers entered after pressing
(TONE)
will not be included when
redialing.
(PAUSE)
TALK Indicator
(TALK)
AUTO
Memory Station
Numbers
PROGRAM