Making Calls
30
To dial after confirming the entered number (Pre-dial)
• If the Handset Talking Keypad is turned off (p. 20), the handset will not announce
the buttons you press.
To adjust the receiver/speaker volume during a conversation
There are 6 volume levels for the receiver and the speaker.
To increase volume, press
[
B
]
.
To decrease volume, press
[
d
]
.
• The number of steps indicates the volume level.
• The display shows the current volume setting.
• If you try to increase/decrease volume when it is at the maximum/minimum level,
the handset will beep 3 times.
•
If you change the receiver volume to level 1 or 6,
the receiver volume will
return to level 2 or 5
— the next time you make or answer a call,
— when you press
[
C
]
to switch to the receiver during a hands-free conversation
using the speakerphone, or
— when you unplug the optional headset to switch to the receiver (p. 73).
• 3 levels (High, Medium and Low) are available while using the headset.
To redial the last number dialed
1
Enter a phone number.
• The handset announces each button you press,
including
[1]
to
[0]
,
[
*
]
(“
Star
”),
[
#
]
(“
Pound
”),
[FLASH/CALL WAIT]
(“
Flash
”) and the soft key
(
Pause
).
• The announcement is heard at the speaker
volume (see below). To increase or decrease
volume, press
[
B
]
or
[
d
]
.
• If you misdial, press the soft key (
Clear
). Enter
the correct number.
• If a pause is required when dialing, press the soft
key (
Pause
) where needed (p. 58).
• To cancel, press
[OFF]
.
2
Press
[
C
]
or
[
s
]
.
3
To hang up, press
[OFF]
or place the handset on the base unit.
The handset will not make
announcements, when:
• the Handset Talking Keypad is turned off
• the Answering System is in use
• the handset has lost communication with the base unit
• the base unit is announcing
• the base unit is making an outside call.
Press
[
C
]
or
[
s
]
, then press
[REDIAL]
.
3334444
|
Clear Pause
K
L
Volume
Low
High
(VE) Mute
K
L
Ex. Level 6
PQQX14302ZB.book 30 ページ ２００４年７月３０日 金曜日 午後４時５２分