Panasonic KX-TG2355S Operating Instructions Manual Download Page 32

Page: 32 / 84

Caller ID Service

Base unit Talking Caller ID feature

This feature must be turned on or off for the base unit by using the handset.

Using the Caller List

The unit can record information up to 50 different callers and store this information
in the Caller List. Caller information is sorted by the most recent call to the oldest.
When the 51

call is received, the information from the 1

call is deleted.

The unit will also tell you how many calls you missed while you were out or
unavailable to answer the phone.

• When new messages have been recorded (p. 55), “

New message

” will be

displayed in place of missed calls display.

Press

[MENU]

Scroll to “

Initial setting

” by pressing

[

]

[

]

, then press

Select

Scroll to “

Set base unit

” by pressing

[

]

[

]

, then press

Select

Scroll to “

Talk Caller ID

” by pressing

[

]

[

]

, then press

Select

Select “

Off

” or “

” by pressing

[

]

[

]

Press

Save

, then press

[OFF]

The display will show the number of calls
you missed.

Press

Rcvd calls

to review other calls

logged in the Caller List.
• If there are no items in the Caller List,

“

Rcvd calls

” will not be displayed.

• After viewing the missed call entries,

“

missed calls

” will disappear from the

display.

Handset

Initial setting

Back

Select

Set base unit

Back

Select

Talk Caller ID

Back

Select

Talk Caller ID

:On

Back

Save

2 missed calls

Charging

2 missed calls

Rcvd Phone

calls book

Handset off the base unit

Handset on the base unit

PQQX14027YA.book 32 ページ２００４年２月４日　水曜日　午後１時３５分

Summary of Contents for KX-TG2355S





















































































Search results

Summary of Contents for KX-TG2355S

Reviews:

Related manuals for KX-TG2355S

Brands by name

Popular brands

Panasonic KX-TG2355S, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2355S

Reviews:

Related manuals for KX-TG2355S

Brands by name

Popular brands