Base unit
With the base unit facing you, the antenna should be straight up on the right side, towards the back of the
unit. The handset's charging cradle is on the left of the base unit. This is an inch deep depression. For
charging, the bottom of the handset gets put into the cradle with the handset buttons facing up. The unit
will beep when the handset is properly placed in the cradle for charging. The handset can be placed in the
cradle in an inverted position. Moving toward the back of the unit on the right of the cradle, there is a
large rectangular textured area. This is the speaker.
In front of the speaker to the left is a smooth rectangular area. This is the display.
Below the display is a row of 4 thin buttons. The left-most one is the MEMO button. Immediately to the
right is the ERASE button. The third button from the left is the REPEAT button. The right-most is SKIP
button. The REPEAT button and the SKIP button are marked with a raised "nib".
To the right of the display are two buttons in a vertical column. The thin button is the GREETING button.
Immediately below it is the ANSWER ON square button with an indicator light at the upper right. To the
right of the ANSWER ON button is the STOP button with a raised "nib". On the right of the STOP button,
there is a large round button. It is the MESSAGE PLAYBACK button.
Moving down to the front of the unit, 2 thin buttons with a raised nib are the VOLUME buttons. The left
one is to decrease, the right one is to increase. To the left of these buttons, there is the IN USE indicator
light. The IN USE indicator light is also CHARGE or HOLD indicator light. To the right of the
VOLUME buttons, a round button is the LOCATOR button. The LOCATOR button is also the
INTERCOM button.
PQQX13315WA-BM
September 26, 2002
