12
For assistance, please visit http://shop.panasonic.com/support
Getting Started
Display icons
Item
Meaning
*
1
Indicates a received call
*
1
Indicates an outgoing call
Flashes to indicate a new missed
call and when viewing a new
missed call in the caller list
Steady when viewing a missed
call in the caller list
*
1,
*
2
Indicates a blocked number
*
1
Flashes when reveiving an
incoming call
Steady when the phone is off
hook
*
1
Speakerphone is activated
Ringer volume is off
*
3
Flashes to indicate new voicemail
messages received
Steady when the entry has been
viewed in the caller list
Flashes when recording a
new message
Steady when answering system
is on
*
1
Silent mode is on
*
1
Out of base unit range
*
1
Range status: The more bars
visible, the closer the handset is
to the base unit.
*
1
Alarm is on
*
1
Handset only.
*
2
Caller ID subscribers only.
*
3
Voice mail subscribers only.
Navigating the menus
The phone has an easy to use menu system.
Each menu has a list of options, which can be
seen on the menu map on page 13.
When the handset and base unit are in standby:
4
L
Menu
R
to open the main menu.
5
L
s
R
:
available options.
6
L
OK
R
to select an option.
7
To return to the previous menu level, press
L
Back
R
.
8
To exit the menu and return to standby,
press
L
OFF
R
on the handset or
L
EXIT/STOP
R
on the base unit.
Note:
If no buttons are pressed for 30 seconds,
the handset and base unit returns to standby
automatically.
Date and time
Handset
1
L
Menu
R
,
L
d
R
“Personal set”
,
press
L
OK
R
.
2
L
d
R
“Date & time”
.
3
L
OK
R
to select.
4
Enter the current month, date, and year using
the keypad (e.g.
L
0
R
L
7
R
L
1
R
L
2
R
L
2
R
L
0
R
for
July 12, 2020), press
L
OK
R
to confirm.
5
Enter the current time using the keypad
(e.g.
L
0
R
L
9
R
L
3
R
L
0
R
for 09:30), then press
L
s
R
to select
“AM”
or
“PM”
and press
L
OK
R
to
save.
6
L
OFF
R
to return to standby.
Other settings
Dial mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”, to change this setting,
see page 26.
“Tone”
: For tone dial service.
“Pulse”
: For rotary/pulse dial service.
