–
5
–
Battery charge
Range/Distance (No link to base)
Question
Cause & solution
How do I charge the battery?
L
Make sure that the battery is properly installed in the
handset and the cover is closed. Place the handset on
the base unit or charger. Confirm
i
and battery
strength icon (e.g.
7
Low,
6
Medium,
5
High) are alternately shown on the display.
L
It takes approx. 7 hours to charge the empty battery.
When it is fully charged,
5
remains on the display.
This will change depending on battery charge.
Can I leave the handset on the
base unit or charger after battery
is fully charged or each call is
finished?
L
You can place the handset on the base unit or charger
anytime. Battery is not overcharged and there is no
damage to the battery. By placing the handset on the
base unit or charger, it is always fully charged.
Where can I buy new battery?
L
Battery can be purchased through your local retailer.
Question
Cause & solution
What is the range/distance of my
cordless phone? (Why am I
getting short or poor range/
distance on my cordless phone?)
Why is
w
flashing?
L
Range/distance is related to technology and
enviromental factors. Therefore we cannot provide a
given range or distance.
L
Make sure that the AC adaptor is properly connected
to wall socket and to the base unit and that beep tones
sound when you press
{x}
on the base unit.
L
Move closer to the base unit (Allow up to 60 seconds
for the handset to reassign to the base unit.).
L
If you try manual registration process, allow up to 60
seconds for the handset to reassign to the base unit.
L
If the above remedies do not solve the problem, refer
to the troubleshooting section in your Operating
Instructions for more information.
TG1861AL(e)_QG.fm Page 5 Wednesday, March 29, 2006 4:27 PM
