Panasonic KX-TG1860BXS, Service Manual

Page: 6 / 105

4 BATTERY
4.1. Battery Installation
1. Insert the batteries negative ( ) terminal first.
2. Close the handset cover.
Note:
•
Use only rechargeable AAA-size Ni-MH batteries (HHR-4EPT).
4.2. Battery Charge
Place the handset on the base unit for about 7 hours before initial use.
When charging, and battery strength icon are alternately shown on the display. When the batteries are fully charged,
flashes.
Note:
•
It is normal for the handset to feel warm during charging.
•
It takes 7 hours to fully charge the batteries, however, you can use the handset before the batteries are fully charged.
•
Clean the charge contacts of the handset and base unit with a soft, dry cloth, otherwise the batteries may not charge
properly. Clean if the unit is exposed to grease, dust or high humidity.
•
When flashes, recharge the handset batteries. will continue to flash until the batteries have been charged for at
least 15 minutes.
•
If the handset is turned off, it will be turned on automatically when it is placed on the base unit.
6
KX-TG1860BXS / KX-TG1860B XT / KX-TCA132CXS / KX-TCA132CXT / KX-TCA130CXS / KX-TCA130CXT