Base Unit Settings
21
Base unit settings
To customise the base unit using the handset:
1
{j
/OK
}
2
Press
{^}
or
{V}
to select
“
Base Unit Setup
”
.
i
{
>
}
3
Press
{^}
or
{V}
to select the desired item in the base unit settings menu.
i
{
>
}
4
Press
{^}
or
{V}
to select the desired item in the sub-menu.
i
{
>
}
5
Press
{^}
or
{V}
to select the desired setting then press
{
>
}
.
L
This step may vary depending on the feature being programmed.
L
To exit the operation, press
{ih}
.
Note:
L
The current item or setting is indicated by
>
on the display.
*1 Change the recall time, if necessary, depending on the requirements of your
service provider/telephone company or PBX.
The recall time depends on your telephone exchange or host PBX. Consult your
PBX supplier if necessary.
You can access your service provider/telephone company “Call Waiting” service
by having the recall time set at 100 ms, and then follow your service
provider/telephone company “Call Waiting” instructions to operate this service.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal
the PIN to you.
*3 If you forget your PIN, consult your nearest Panasonic service centre.
Menu
Sub-menu
Details (default setting)
Ringer Volume
—
For base unit
(Medium)
Call Options
Recall/Flash
Recall time (
“
100 msec.
”
)
*1
Area Code
page 22
Other Options
Base Unit PIN
Change base unit PIN (
“
0000
”
).
*2
– Enter the current 4-digit base unit
PIN.
*3
– Enter the new 4-digit base unit
PIN.
i
{
>
}
i
{ih}
Repeater Mode
(
“
Off
”
): page 32
TG1855-1857AL(e-e).book Page 21 Thursday, July 12, 2007 5:31 PM
Summary of Contents for KX-TG1855AL
Page 43: ...Notes 43...