Phonebook
You can add 100 names (16 characters max.) and
phone numbers (24 digits max.) to the phonebook,
and assign each phonebook entry to the desired
group (page 32).
Important:
R
All entries can be shared by the base unit and
any registered handset.
Adding phonebook entries
Handset / Base unit
1
Proceed with the operation for your unit.
Handset:
MFN
a
M
MENU
N
Base unit:
M
N
a
M
MENU
N
2
MbN
:
“
Add new entry
”
a
M
SELECT
N
3
Enter the party’s name.
a
M
OK
N
4
Enter the party’s phone number.
a
M
OK
N
5
MbN
: Select the desired group.
a
M
SELECT
N
2 times
6
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Note for handset and base unit:
R
In step 3, you can switch the language for
entering characters.
#
a
MbN
: Select the desired language.
a
M
OK
N
Note for base unit:
R
You can also add entries as follows:
Press
M
N
.
a
M
ADD
N
a
Go to step 3.
Entering characters
Handset
Press the dial key that corresponds to the desired
character. Press repeatedly to scroll through the
available characters.
The following operations are also available.
Key
Operation
*
Switch between the
uppercase and lowercase
(A
«
a)
MFN
MEN
Move the cursor
Key
Operation
M
CLEAR
N
Erase the character or
number
R
To erase all, press and
hold it.
R
To enter another character that is located on the
same dial key:
Handset:
Press
MEN
to move the cursor to the
next space.
Base unit:
Press
M
N
to move the cursor to
the next space.
R
If you do not press any dial key within 2
seconds after entering a character, the
character is fixed and the cursor moves to the
next space.
Erasing the character or number
Handset:
Press
MFN
or
MEN
.
a
M
CLEAR
N
Base unit:
Press
M
N
or
M
N
.
a
M
CLEAR
N
R
Press and hold
M
CLEAR
N
to erase all characters
or numbers.
Storing a redial list number to the phonebook
Phone numbers of up to 24 digits can be stored in
the phonebook.
Handset / Base unit
1
Proceed with the operation for your unit.
Handset:
MEN
REDIAL
Base unit:
M
REDIAL
N
2
MbN
: Select the desired entry.
a
M
SAVE
N
3
To store the name, continue from step 3,
“Editing entries”, page 32.
Note for handset and base unit:
R
In step 3, you can switch the language for
entering characters.
#
a
MbN
: Select the desired language.
a
M
OK
N
Storing caller information to the phonebook
Handset
1
MCN
CID
2
MbN
: Select the desired entry.
a
M
MENU
N
R
To edit the number:
MbN
:
“
Edit
”
a
M
SELECT
N
Press
M
EDIT
N
repeatedly until the phone
number is shown in the desired format
a
M
SAVE
N
a
MbN
:
“
Phonebook
”
a
M
SELECT
N
a
Go to step 4.
For assistance, please visit http://shop.panasonic.com/support
31
Phonebook