*3 If you program these settings using one of the handsets, you do not need to program the
same item using another handset. (KX-TG1712/KX-TG1713)
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*5 When this feature is set to off, the handset number is displayed.
*6 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys.
*7 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*8 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*9 KX-TG1712/KX-TG1713
*10 To prevent other users from joining your conversations with outside callers, turn this feature
on. (KX-TG1712/KX-TG1713)
*11 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). Alarm can be programmed
for each handset. You can set one of 2
different alarm options (once or daily).
Important:
R
Make sure the unit’s date and time setting
is correct (page 12).
1
M
N#720
2
MbN
: Select the desired alarm option.
a
M
N
“
Off
”
Turns alarm off. Go to step 7.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 4.
3
Enter the desired date and month.
a
M
N
4
Set the desired time.
a
M
N
5
MbN
: Select the desired alarm tone.
a
M
N
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
6
MbN
: Select the desired snooze setting.
a
M
N
7
M
N
a
MeN
Note:
R
Press
MeN
to stop the alarm completely.
R
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R
Press any dial key from
0
to
9
,
*
, or
#
to stop the sound but keep set time and/or
the snooze function activated.
R
If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
20
Programming
KX-TG171xSA_en_0328_ver001.pdf 20
3/28/2023 2:08:46 PM