18
Useful Information
Cause & Solution
•
You are using the handset or base unit in an area
with high electrical interference. Place the handset
and base unit away from interference sources,
such as antennas and mobile phones.
•
The redialled number was more than 20 digits long.
Redial the number manually.
•
Make sure the charge contacts are not dirty and the
AC adaptor is connected properly, then try again.
•
Clean the charge contacts and charge again (page
7,8).
•
It is time to replace the batteries (page 7).
•
Wipe the battery ends (+, –) and the unit contacts
with a dry cloth.
•
You must subscribe to Caller ID service.
•
Your unit is connected to a telephone line with
ADSL (JetStream) service. We recommend that you
contact your ADSL service provider to have an
ADSL Splitter installed. We do not recommend the
use of generic ADSL filters. Contact your ADSL
service provider for details.
•
When you answer the calls, the caller information
will not be left in the call log.
•
Other telephone equipment such as a monitored
Burglar Alarm or the modem in the SKY Digital
decoder may be interfering with this unit.
Disconnect the other equipment and try again.
•
Reset has failed. Please try again (page 11).
•
If you reset to default, the numbers in the
phonebook and redial list are cleared.
•
If you have changed PIN but forgot it, please
contact your nearest Panasonic Service Centre
for help.
•
Caller information has been received (page 15).
Problem
Noise is heard during a call.
Pressing [ ] does not display/ dial
the last number dialled.
I tried to charge the batteries, but they
do not charge at all.
I charged the batteries for 10 hours, but
still flashes.
I charged the batteries for 10 hours, but
the operating time seems to be short.
Caller information is not displayed.
I reset the handset but a long beep is
heard and the display returns to
telephone setting mode.
I found the numbers stored in the
phonebook and in the redial list are
cleared.
I cannot enter the PIN.
-CALL- is displayed.
