Useful Telephone Settings
15
Guide to base unit settings
To customise the base unit (general approach):
1
{j
/OK
}
2
Press
{v}
or
{e}
to select “
SETTING BS
”.
i
{>}
L
“
INPUT CODE
” is displayed.
3
Enter the desired code number. Follow the instructions in the “Feature”
column of the chart.
L
To exit the operation, press
{ih}
.
Code No.
Feature (default setting)
{
0
}
Reset base unit to its default settings.
−
Enter base unit PIN (default: “
0000
”).
i
{>}
{
3
}
Dialling mode (Tone): page 9
Recall/flash time (600 ms)
−
Enter base unit PIN (default: “
0000
”).
i
{
2
}
i
{
1
}
−
Select the desired setting by pressing
{
1
}
for 100 ms,
{
2
}
for 600 ms or
{
3
}
for 300 ms.
i
{>}
DTMF mode (Off): page 17
{
5
}
Change base unit PIN (“
0000
”).
−
Enter the current 4-digit base unit PIN.
−
Enter the new 4-digit base unit PIN.
−
Enter the new 4-digit base unit PIN again.
{
6
}
Call restriction
■
Setting call restriction
−
Enter base unit PIN (default: “
0000
”).
i
Enter
the desired handset number by pressing the
appropriate dial key.
L
The selected handset number flashes on the
display.
−
{>}
−
Enter the phone number to be restricted (8 digits
max.).
L
To select a different memory location, press
{>}
and enter a number.
−
{>}
■
Turning on/off call restriction
−
Enter base unit PIN (default: “
0000
”).
L
Handset number is displayed. A flashing number
indicates call restriction is on; a non-flashing
number indicates call restriction is off.
−
Enter the desired handset number by pressing the
appropriate dial key to turn on/off.
i
{>}
2 times
Emergency number
−
Enter base unit PIN (default: “
0000
”).
i
{*}
■
Storing:
−
Enter the emergency number (8 digits max.).
L
To select a different memory location, press
{>}
and enter a number.
−
{>}
■
Editing:
Press
{>}
to display the desired number.
i
{
C
}
i
Enter the new emergency number.
i
{>}
Code No.
Feature (default setting)
TG1311_1312CX(e).book Page 15 Friday, September 26, 2008 2:46 PM
