Preparation
10
Connections
When the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.
Important:
L
Use only the AC adaptor and telephone
line cord supplied with this unit.
Note:
L
After connection, you must charge the
batteries to make or answer calls with the
handset (page 10).
L
Never install telephone wiring during a
lightning storm.
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Battery installation
Important:
L
Use only rechargeable batteries (page 5).
L
Wipe the battery ends (
S
,
T
) with a dry
cloth.
L
When installing the batteries, avoid
touching the battery ends (
S
,
T
) or the
unit contacts.
1
Insert the batteries negative (
T
) end
first.
2
Close the handset cover.
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
(220
–
240 V, 50/60 Hz)
To telephone
network
Hook
TG1223-1233BX(e-e).book Page 10 Wednesday, November 15, 2006 3:32 PM
