Programming
24
For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item using another unit.
*2 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the
handset to answer a call, turn off this feature.
*3 The base unit and handset can display the Internet address where you can download the operating
instructions or get further information for this product, using your computer.
*4 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys,
including confirmation tones and error tones.
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (base unit: tone 1
to 6/handset: tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers.
*6 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even
if the caller has already hung up. You may either hear a dial tone or no one on the line when you
answer the call.
*7 The preset tones and melodies in this product are used with permission of © 2007 Copyrights Vision
Inc.
*8 When the ringer volume is turned off,
~
is displayed and the base unit and/or handset do not ring for
outside calls.
However even when the ringer volume is set to off:
– the base unit rings at the low level for intercom calls (page 38).
– the handset rings at the lowest level for alarm (page 25) and intercom calls (page 38), and rings at
the highest level for paging (page 38).
*9 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary. The setting should stay at
“
700ms
”
unless pressing
{
FLASH
}
fails to pick up the waiting
call.
*10Generally, the line mode setting should not be adjusted. If
“
New Voice Mail
”
is not displayed, even
when the message indication service is available (page 37), you need to change the line mode to
“
A
”
.
*11This feature allows the unit to automatically adjust the date and time setting when caller information
is received. To use this feature, set the date and time first.
Y
VM tone detect
(
VM
: Voice mail)
{
3
}{
3
}{
2
}
<
On
>
Off
r
37
Y
Voice prompt
(Change language)
{
1
}{
1
}{
2
}
<
English
>
Español
r
12
Operating
unit
Feature
Feature
code
Setting
System
setting
*1
Page
TG106x(e).book Page 24 Friday, January 16, 2009 10:45 AM
