Panasonic KX-TG1034B Service Manual Download Page 32

Page: 32 / 95

KX-TG1034B/KX-TG1035S/KX-TGA101B/KX-TGA101S

8.3.

How to Clear User Setting

Units are reset to the Factory settings by this operation (Erase recorded Voice messages, stored Phone numbers, Caller list and
etc.)

Note:

• The reset menus differ depending on the following operations.
•

This operation should not be performed for a usual repair.

8.3.1.

Resetting both base unit and handset

Note:

(*1) Refer to

Registering a Handset

(P.20).

• Handset registration will not be reset.

8.3.2.

Resetting only handset

The only handset is reset by doing the following steps

Note:

(*2)

• The registration of the base unit and the handset are cancelled.
• If the handset needs to be registered to the base unit, refer to

Registering a Handset

(P.20).

• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.
• Caller ID data will not be reset.

8.3.3.

Delete all handset registration of base unit

Summary of Contents for KX-TG1034B
































































































Search results

Summary of Contents for KX-TG1034B

Reviews:

Related manuals for KX-TG1034B

Brands by name

Popular brands

Panasonic KX-TG1034B, Service Manual

Search results

Summary of Contents for KX-TG1034B

Reviews:

Related manuals for KX-TG1034B

Brands by name

Popular brands