Panasonic KX-TG1034 Service Manual Download Page 66

Page: 66 / 95

KX-TG1034B/KX-TG1035S/KX-TGA101B/KX-TGA101S

12 Schematic Diagram

12.1. For Schematic Diagram

12.1.1. Base Unit (Schematic Diagram (Base Unit_Main))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

12.1.2. Handset (Schematic Diagram (Handset))

Notes:

1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagram may be modified at any time with the development of new technology.

12.1.3. Charger Unit (Schematic Diagram (Charger Unit))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagram may be modified at any time with the development of new technology.

Summary of Contents for KX-TG1034
































































































Search results

Summary of Contents for KX-TG1034

Reviews:

Related manuals for KX-TG1034

Brands by name

Popular brands

Panasonic KX-TG1034, Service Manual

Search results

Summary of Contents for KX-TG1034

Reviews:

Related manuals for KX-TG1034

Brands by name

Popular brands