Panasonic KX-TEA308 User Manual Download

Page: 3 / 168

User Manual

In this manual,

•

Proprietary Telephone is abbreviated as "PT"

Single Line Telephone is abbreviated as "SLT".

Proprietary Telephone with a Display is abbreviated as "Display PT".

•

The suffix of each model number is omitted.

•

The following icons are used as hints and conditions throughout this manual.

1.1.1 Before Operating a Telephone

We recommend using SMS-enabled Panasonic
SLTs.

In this manual, "proprietary telephone" ("PT") means an analogue proprietary telephone (APT).

A Panasonic telephone that is equipped
with a Navigator Key and a display helps
you to access various features easily.
The Message/Ringer lamp (if equipped)
informs you of any calls or messages
waiting.

Easy Operation

Navigator Key

Message/Ringer Lamp

This PBX can route incoming calls sent
from a Short Message Service (SMS) centre
to specific single line telephones (SLTs) that
support SMS.

Fixed Line SMS Terminal Support

Telephone

Company

SMS centre

Conditions

Hints

Summary of Contents for KX-TEA308









































































































































































Search results

Summary of Contents for KX-TEA308

Reviews:

Related manuals for KX-TEA308

Brands by name

Popular brands

Panasonic KX-TEA308, User Manual

Search results

Summary of Contents for KX-TEA308

Reviews:

Related manuals for KX-TEA308

Brands by name

Popular brands