Panasonic KX-TEA308 Installation Manual Download | Manualshive

Page: 14 / 82

background image

1.1 System Highlights

14

Installation Manual

1.1

System Highlights

1.1.1

System Highlights

Built-in Voice Message (BV) (Optional voice message card required) (KX-TEA308 only)

Built-in Voice Message (BV) allows a caller to leave a voice message in a user's personal message
area or the PBX's common message area.

Fixed Line SMS Terminal Support (Optional Caller ID card required)

The PBX can relay incoming calls from a Short Message Service (SMS) centre to specific single line
telephones (SLTs) that support SMS. Fixed Line SMS is a service that allows text messages to be
sent and received via Public Switched Telephone Network (PSTN) access. We recommend using
SMS-enabled Panasonic SLTs.

Caller ID Display on SLT (Optional Caller ID card required)

The PBX can receive Caller ID information (telephone numbers and callers' names) from calls
received on outside (CO) lines. This information can be shown on the displays of SLTs that support
Caller ID as well as proprietary telephones (PTs) when receiving calls.

3-level Automated Attendant (AA)

3-level Automated Attendant (AA) service allows a caller to dial a single-digit number (Direct Inward
System Access [DISA] AA number) following the guidance of 3-level DISA outgoing messages
(OGMs), and be connected to the desired party automatically.

PC Programming

System programming settings can be accessed using a PC and the Panasonic KX-TE308
Maintenance Console software as well as by using a PT.

The PBX software can be upgraded via the Serial Interface (RS-232C port) or USB port, using the
KX-TE308 Maintenance Console software.

Quick Setup

Basic PBX parameters such as Automatic Configuration for Outside (CO) Line Type, Country Setting
can be programmed the first time the PBX is accessed with a PC using the KX-TE308 Maintenance
Console software.

Advanced Hybrid System

This PBX supports the connection of PTs, Direct Station Selection (DSS) Consoles and single line
devices such as SLTs, fax machines, wireless telephones and data terminals.

«
...
12
13
14
15
16
...
»

Summary of Contents for KX-TEA308



















































































Reviews:

No comments

Related manuals for KX-TEA308

Brand: Yeastar Technology Pages: 15

Brand: IKE Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands