Assigning the Incoming Trunk Call Destination
For analogue trunk users (DIL Setting):
1.
Under
CO & Incoming Call
, click
DIL Table & Port
Settings
.
2.
Confirm that the
DIL
tab is selected.
3.
Configure the settings as required.
4.
Click
OK
.
For ISDN trunk users (DDI Setting):
1.
Under
CO & Incoming Call
, click
DDI / DID Table
.
2.
Configure the settings as required.
3.
Click
OK
.
For ISDN trunk users (MSN Setting):
1.
Under
CO & Incoming Call
, click
DIL Table & Port
Settings
.
2.
Click the
DDI / DID / TIE / MSN
tab.
3.
Set the
Distribution Method
of the desired ports to
MSN
.
4.
Click
OK
.
5.
Click
MSN Table
.
6.
Click the
MSN
tab.
7.
Configure the settings as required.
8.
Click
OK
.
26
Getting Started for Physical Cards
4.1 Programming the PBX
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM
