Programming
Number
Programming Group Title
Description
[3XX]
TRS/ARS Programming
TRS and Automatic Route Selection (ARS)
programming
[4XX]
CO Line Programming
CO line and trunk group settings
[5XX]
COS Programming
Class of Service parameters
[6XX]
Extension Programming
Extension feature settings
[7XX]
Resource/Interface Programming PBX interface and external device settings
[8XX]
SMDR & Maintenance
Programming
Station Message Detail Recording (SMDR) and
maintenance feature settings
[9XX]
Card Programming
Used to display the cards currently installed in the
PBX, or to "delete" a card from system programming
before physically removing it.
2.1.2 Maximum Values
Throughout this manual, maximum entry values are shown for each programming item. When maximum entry
values for one or more of the supported PBX models differ, these differences are listed within the programming
item, as shown in the example below.
These values vary by PBX model
[351]
Carrier Table No.
Trunk Group No.
END
ENTER
ENTER
KX-TDA50: 01–10
KX-TDA100: 01–10
KX-TDA200: 01–10
KX-TDA600: 01–48
KX-TDA50: 01–64
KX-TDA100: 01–64
KX-TDA200: 01–64
KX-TDA600: 01–96
Disable/
Enable
SELECT
However, please note that extension number, slot and port entry values are not listed within each programming
item. These values vary depending on the model of PBX and the card type installed, as shown below.
Extension Numbers
All models: 1–5 digits
Feature Numbers
All models: 1–4 digits
KX-TDA50 Slot and Port Values
Available Slot Entry Values
Slot Number
Supported Cards
01
Pre-installed Super Hybrid Ports
02–04
DLC4, HLC4, PLC4, LCOT4 cards
18
PT Programming Manual
Document Version 2008-11
2.1.2 Maximum Values