Panasonic KX-TDA5450, Installation Manual

Page: 30 / 86

PPPoE Detailed Configuration
Generally, the following configurations are not required.
1.
If necessary, assign each parameter referring to the descriptions below.
Parameter & Description Default Value Range
Server Name
Specifies the server name used for PPPoE
connection.
No default Max. 23 alphanumeric
characters
Service Name
Specifies the service name that is applied to a
PPPoE connection.
No default Max. 31 alphanumeric
characters
MTU
Specifies the maximum size of IP packet to be
sent.
1454 576–1492
DNS Server Address
Specifies the method of IP address setting for a
DNS server.
Auto Config Auto Config, Manual Config
*1
Authentication Type
Specifies the authentication method.
AUTO AUTO, Not Used, CHAP, PAP
PPP Keep Alive
Specifies whether the PPP Keep Alive feature is
used or not.
Enable Enable, Disable
*1 When selecting " Manual Config ", specify the IP addresses of both Primary DNS Server and Secondary DNS Server .
2.
Click Set .
The Select Connection screen is displayed.
3.
Click OK (Reboot) to reboot the card.
30 Installation Manual Document Version 2008-10
3.3.1 WAN Interface