manualshive.com logo in svg

Panasonic KX-TDA50, Feature Manual

Share
Download
Panasonic KX-TDA50 Feature Manual Download Page 165

Type

Description

Details in

No Answer (IRNA)

If a called party does not answer a call within a
preprogrammed time period (Intercept time), the
call is redirected to a preprogrammed destination.

®

 9.1.11  Intercept

Routing

Busy

If a called party is already handling another call,
the new call is redirected to a preprogrammed
destination.

DND

If a called party is in Do Not Disturb (DND) mode,
the call is redirected to a preprogrammed
destination.

No Destination

If a destination is not assigned, the call is
redirected to an operator.

®

 9.1.12  Intercept

Routing—No
Destination

PC Programming Manual References

3.17  [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—

Trunk Property

12.2  [10-2] DIL Table & Port Settings—DIL—

Trunk Property

9.1.11  Intercept Routing

Description

Redirects an incoming CO line call or intercom call to a preprogrammed destination when the original
destination does not, or can not, answer the call. There are four types of Intercept Routing, described below.

Type

Description

No Answer (IRNA)

If a called party does not answer a call within a preprogrammed time period
(IRNA Timer), the call is redirected to a preprogrammed intercept
destination.
The assigned intercept destination of the extension port.

4.4  [2-3] Timers & Counters

→

Dial / IRNA / Recall / Tone—

Intercept Routing No Answer (IRNA)—

Day, Lunch, Break, Night

→

DISA / Door / Reminder / U. Conf—

DISA—Intercept Timer—Day,

Lunch, Break, Night

[203] Intercept Time

Busy

If a called party is already handling a call, new calls are handled as follows:

–

The call is redirected to the preprogrammed Intercept Routing—Busy
destination.

–

If an Intercept Routing—Busy destination is not enabled, the caller will
hear a busy tone. However, if the call is made through an LCOT/
ELCOT or T1 [LCOT/GCOT] card, the caller hears a ringback tone.

DND

If a called party is in Do Not Disturb (DND) mode, the call is redirected to
a preprogrammed intercept destination.

Document Version  2010-11  

Feature Manual

165

9.1.11 Intercept Routing

Summary of Contents for KX-TDA50

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands