2.4 Data Management
44
Programming Guide
2.4
Data Management
It is strongly recommended that you download the configuration data and the address
translation table (DN2IP) data from the VoIP Gateway Card for backup and archive purposes.
The following sections provide the procedures for downloading and uploading.
2.4.1
Upload of Configuration Data
Before uploading the data, place the card in the "STOP" status (see "2.3.1 Status Control").
1.
Click
3.1 Upload of Configuration data (PC –> VoIP Gateway)
in the main menu.
2.
Click
Browse
and choose a file to upload.
At any time during the session, you can:
•
Click
MENU
to return to the main menu (see "2.1 Main Menu for the Administrator").
•
Click
LOGOUT
to log out from the IP-GW4 Maintenance Utility (see "2.5.2 Log Out").
3.
Click
UPLOAD(PC–>VoIP Gateway)
.
The upload operation starts.
Notes
•
If the upload operation is executed while the card is in the "RUN" status, you will
see an error screen. Click
Change RUN/STOP status Screen
and place the
card in the "STOP" status (see "2.3.1 Status Control"), and then upload the data
again.
•
If the operation is not successful for other reasons, you will see another error
screen. Click
OK
to return to the previous screen, and then upload the data
again.
