manualshive.com logo in svg

Panasonic KX-TDA150, User Manual, Page: 166 / 238

Share
Download
Panasonic KX-TDA150 User Manual Download Page 166

1.13.2  Using the Directories

You can call using the directories (

Personal Speed Dialling Directory, System Speed Dialling Directory and

Extension Number Directory

).

Only personal directories can be stored, edited or deleted on your extension.
If a call arrives while you are using a directory, the display will be replaced with the caller’s information.

–

 Calling with the Directory

–

 Storing Names and Numbers

–

 Entering Characters

 Calling with the Directory

To select and call

KX-NT300/KX-DT300/KX-T7600

Press 

Right 

until 

desired directory

 

appears.*

Press 

Up

 or 

Down

until 

desired

party

 appears.

While on-hook

Off-hook.

•

* The display order is as follows:
One time: Personal Speed Dialling Directory
Two times: System Speed Dialling Directory
Three times: Extension Number Directory

•

To cancel or exit, press the CANCEL or FLASH/RECALL button.

•

You can lock your personal speed dialling directory by using an extension PIN (Personal
Identification Number), so that you can prohibit access to it (Display Lock). Refer to
"3.1.2  Settings on the Programming Mode".

•

Directory entries generally should include name and number. If the name is not registered,
an entry cannot be displayed.

•

The System Speed Dialling Directory can be displayed simply by pressing the AUTO DIAL/
STORE button while on-hook.

166

User Manual

1.13.2 Using the Directories

Summary of Contents for KX-TDA150















































































































































































































































Reviews:

No comments