manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 270

Note

Before recording a Two-way telephone conversation, you should inform the other party that the
conversation will be recorded.

14.

VPS Data Control by the PBX

*1

The date and time settings of the VPS are controlled by the PBX.

15.

Remote FWD Setting by the VM

*1

Extension FWD settings can be programmed using the VPS.

*1

This feature may not be supported depending on the software version of the VPS.

Conditions

[General]

•

Voice Mail (VM) Transfer Button

A flexible button can be customised as the Voice Mail (VM) Transfer button with the floating extension
number of the VM group as the parameter.

[Live Call Screening (LCS)]

•

This feature is not available for ISDN extensions.

•

LCS Button

A flexible button can be customised as the LCS button.

•

Extension Personal Identification Number (PIN)

To prevent unauthorised monitoring, it is recommended the LCS user assign an extension PIN. This PIN
will be required when setting LCS. (

®

 1.28.1  Extension Personal Identification Number (PIN)) If the user

forgets the PIN, it can be cleared by an extension assigned as the manager.

•

Each extension can be programmed to either end recording or continue recording the conversation after
the call is intercepted, through personal programming (LCS Mode Set [After Answering]).

®

 6.1  [4-1-1] Wired Extension—Extension Settings—Option 4—

LCS Recording Mode

®

 6.10  [4-2-1] Portable Station—Extension Settings—Option 4—

LCS Recording Mode

•

To use the LCS feature on a PS in Wireless XDP Parallel Mode, LCS can only be turned on or off from the
wired telephone. In Wireless XDP Parallel Mode, setting LCS on/off from the PS has no effect. (

®

1.25.5  Wireless XDP Parallel Mode)

[Two-way Recording into the VPS]

•

Two-way Record/Two-way Transfer Button

A flexible button can be customised as the Two-way Record or the Two-way Transfer button. An extension
number can be assigned to the Two-way Transfer button so that it can be used as a one-touch record
button for the mailbox of the specified extension. (

One-touch Two-way Transfer Button

).

•

When all of the VPS ports are busy:

a.

Pressing the Two-way Record button sends a warning tone

b.

Pressing the Two-way Transfer button followed by an extension number sends a warning tone.

[Transferring to a Mailbox of the VPS]

•

When transferring a trunk call to a mailbox of the VPS, users should use the VM Transfer button.
If using a standard Transfer button, users must dial "#6" after accessing the VPS, and confirm that the
desired mailbox has been reached, before going on hook to complete the transfer.

PC Programming Manual References

4.4  [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—

Recall—Transfer Recall

5.19  [3-7-1] VM(DPT) Group—System Settings
5.20  [3-7-2] VM(DPT) Group—Unit Settings
6.1  [4-1-1] Wired Extension—Extension Settings—Option 4

270

Feature Guide

1.24.3 Voice Mail DPT (Digital) Integration

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands