manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 184

1.17.2  Door Open

Description

An extension user can unlock the door for a visitor using his telephone.
The door can be unlocked by extension users who are allowed to unlock the door through COS programming.
However, while engaged on a doorphone call, any extension user can unlock the door to let the visitor in (

®

1.17.1  Doorphone Call).

Conditions

•

Hardware Requirement:

 A user-supplied door opener on each door.

•

The door opener will unlock the door even if a doorphone is not installed.

•

Door Open Duration

The door can remain unlocked for a preprogrammed time period.

Installation Manual References

2.8.1  Connection of Doorphones, Door Openers, External Sensors, and External Relays

PC Programming Manual References

4.4  [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—

Doorphone—Open Duration

4.8  [2-6-1] Numbering Plan—Main—Features—

Door Open

4.11  [2-7-1] Class of Service—COS Settings—Optional Device & Other Extensions—

Door Unlock

PT Programming Manual References

[207] Door Unlock Time
[512] Permission for Door Open Access

Feature Guide References

2.2.1  Class of Service (COS)

User Manual References

1.10.1  If a Doorphone/Door Opener is Connected

184

Feature Guide

1.17.2 Door Open

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands