manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 182

1.17  Optional Device Features

1.17.1  Doorphone Call

Description

It is possible to connect doorphones directly to the PBX. When a visitor presses the call button on a doorphone,
the doorphone calls a preprogrammed destination (extension or outside party). In addition, extension users
can dial the preset number of a doorphone to call that doorphone.

Conditions

•

Hardware Requirement:

 An optional doorphone, the OPB card and DPH card

•

Each doorphone port can only be assigned to one tenant. The Time Table (day/lunch/break/night) of the
tenant applies. (

®

 2.2.4  Time Service)

•

Call Destination

The incoming doorphone call destination(s) can be assigned for each time mode (day/lunch/break/night)
for each doorphone port. Destinations can be selected. (

®

 1.1.2.1  Internal Call Features—SUMMARY)

•

COS programming determines the doorphone ports that are able to make an outgoing trunk call.

•

Internal Call Block determines which extensions can call a doorphone. (

®

 1.1.2.2  Internal Call Block)

•

Ring Duration

If an incoming call is not answered within a preprogrammed time period, ringing stops and the call is
cancelled.

•

Call Duration

The call duration can be restricted by a system timer. If the timer expires, the call will be disconnected.

•

Door Open

While engaged on a doorphone call, the extension user can unlock the door to let the visitor in. (

®

1.17.2  Door Open)

•

A doorphone number can be referenced for each doorphone port.

Installation Manual References

2.6.1  OPB3 Card (KX-TDA0190)
2.6.2  DPH4 Card (KX-TDA0161)
2.6.3  DPH2 Card (KX-TDA0162)
2.8.1  Connection of Doorphones, Door Openers, External Sensors, and External Relays

PC Programming Manual References

4.4  [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf

→

Doorphone—Call Ring Duration

→

Doorphone—Call Duration

4.8  [2-6-1] Numbering Plan—Main—Features—

Doorphone Call

4.11  [2-7-1] Class of Service—COS Settings—TRS—

TRS Level—Day, Lunch, Break, Night

4.15  [2-8-2] Ring Tone Patterns—Call from Doorphone
4.17  [2-9] System Options—Option 3—

Confirmation Tone—Tone 1 : Called by Voice

7.1  [5-1] Doorphone

182

Feature Guide

1.17.1 Doorphone Call

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands