Panasonic KX-TD816C User Manual Download

Page: 134 / 384

Station Features and Operation (DPT/SLT)

134

User Manual

4.3.18

Call Hold Retrieve

Allows you to retrieve a call that has been placed on hold at other extensions.

Retrieving an outside call on hold

Retrieving an intercom call on hold

Conditions

•

Confirmation Tone
A confirmation tone is sent to the extension user who retrieved the held call. Eliminating
the tone is programmable.

•

"Call Park" cannot be retrieved by this feature.

PT and SLT

Enter the held
outside line number.
(01-08 for KX-TD816 /
01-48 for KX-TD1232)

Dial 53.

outside line no.

Lift the handset or press
SP-PHONE/MONITOR.

Confirmation
tone (optional)

At the other extension;

The CO indicator light
turns steady green.

Press CO whose indicator
is flashing red slowly.

At the other extension;

(CO)

PT and SLT

Dial the extension
number at which a call is
placed on hold.

extension no.

Lift the handset or press
SP-PHONE/MONITOR.

Confirmation tone
(optional)

At the other extension;

Dial 51.

Summary of Contents for KX-TD816C

































































































































































































































































































































































































Search results

Summary of Contents for KX-TD816C

Reviews:

Related manuals for KX-TD816C

Brands by name

Popular brands

Panasonic KX-TD816C, User Manual

Search results

Summary of Contents for KX-TD816C

Reviews:

Related manuals for KX-TD816C

Brands by name

Popular brands