5
ENABLE
DISABLE
18.
Press the SELECT button.
Display example:
19.
If you select "ENABLE" in step 17, enter a System Lock password.
20.
Press the AUTO/OK button.
21.
Enter the System Lock password again.
22.
Press the AUTO/OK button.
23.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration number.
24.
Repeat steps 4 through 22.
25.
Press END.
[Re-registering] (e.g. when changing the DECT system)
1. Repeat steps 1 through 8 of the “Registering for the first time” programming.
2. Press the UP/DOWN button repeatedly until the display below is selected.
Display: PS-PROGRAM
3. Press the SELECT button.
4. Press the UP/DOWN button repeatedly until the display below is selected.
Display: DECT-SYS SETTING
5. Press the SELECT button.
If a System Lock password is registered before, the display below will appear.
(if disabled):
(if enabled) :
UNLOCKED
ENTER PASSWORD
=----
Display:
ENTER PASSWORD
=
****
Display:
REENTER PASSWORD
=----
Display:
REENTER PASSWORD
=
****
Display:
LOCKED
(With a display PT)