Panasonic KX-TD500, Features Manual

Page: 153 / 398

General Features
Features Guide 153
1.6 Originating Features
Alternate Calling—Ring/Voice
Description
Allows an extension user either to ring-signal (Ring call) or voice-signal (Voice call) the other
PT extensions.
Ring call: The called PT rings.
Voice call: The caller's voice is heard through the built-in speaker of
the called PT instead of ringing.
The calling extension user can switch ring-signaling to voice-signaling and vice versa by
pressing " " during an intercom call.
Conditions
• Mode Selection
The PT user can select either to be ring-signaled or voice-signaled by Station Programming.
• Any extension (PT, SLT) user can use this feature during an intercom call if the other party
is a PT extension.
• If the other party is an SLT extension, only Ring-Calling mode is available.
• One time switching
Switching of signaling mode is available only once during a call.
• Voice-signaling is not available in the following cases:
– if the other extension is an SLT.
– if the other extension is busy on another call.
– if another call is ringing on the other extension.
Programming Guide References
System Programming is not required.
Features Guide References
1.6 Originating Features
• Inter Office Calling
1.9 Answering Features
• Hands-free Answerback