manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 146 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 146

2.4

TRS / ARS Programming

146

General Programming 

[312]

ARS Mode

Description

Allows you to turn on or off the Automatic Route Selection (ARS) mode. ARS, if enabled, 
selects the least expensive route to be used for an outside call.

Selection

ON / OFF

Default

OFF

Programming

1.

Enter 312.

Display: ARS Mode

2.

Press NEXT.

Display example: ARS : OFF

3.

Press SELECT until the desired selection is displayed.

4.

Press STORE.

5.

Press END.

Conditions

•

If "OFF" is selected, the Automatic Line Access feature functions instead of ARS.

•

Programmes [313]

ARS Time through [331]

ARS Modify Added Number are used to 

programme ARS.

Feature References

Automatic Route Selection (ARS)

Line Access, Automatic

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments