manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 147 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 147

2.4

TRS / ARS Programming

General Programming 

147

[313]

ARS Time

Description

Assigns times for the four ARS time schedules. It is possible to split a day into four time zones 
(maximum) so that the least expensive line is selected for that time. According to the service 
hours and charges offered by your carriers, enter the starting time of each zone.

Selection

•

Day of the week:
1 (Sun) / 2 (Mon) / 3 (Tue) / 4 (Wed) / 5 (Thu) / 6 (Fri) / 7 (Sat) /   (all days)

•

Time schedule: A / B / C / D

•

Time (hour): 0 through 23 / Disable (no schedule)

Default

All days of the week: A – 8:00; B – 17:00; C – 21:00; D – Disable

Programming

1.

Enter 313.

Display: ARS Time

2.

Press NEXT.

Display: Day of Week?

3.

Enter the day of the week.

Display example: Sun-A: 8:00

To programme another time schedule, keep pressing NEXT or PREV until the desired 
time schedule is displayed.

4.

Enter the hour.

To set no schedule (Disable), press SELECT and go to step 6. If "Disable." is selected, 
pressing SELECT shows the previous stored hour.
To change the current entry, press CLEAR and enter the new hour.

5.

Press STORE.

6.

To programme another time schedule, keep pressing NEXT or PREV until the desired time 
schedule is displayed.

7.

Repeat steps 4 through 6.

8.

Press END.

Conditions

•

Enter a starting time for each time schedule. Select "Disable" for idle schedules.

•

You cannot leave an entry empty.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments